Products

DESCRIPTION

Basic Info.

Model NO.	JH-MWC
Specification	customized
Trademark	JIEHAO&SPINCLE
Origin	China
Production Capacity	20sets/Year

Product Description

Product Description

A chemical shower system is a key device for positive pressure protective suit type bio-safety laboratories. Its main function is to disinfect the surface of the positive pressure protective suit by spraying chemical agents, to prevent the spread of bio-contamination. It is usually arranged between the contaminated area and the semi-contaminated area, as an important barrier for the personnel to safely exit the protective area and avoid the leakage of bio-hazardous substances.

SPINCLE Chemical Shower is a system for disinfection and cleaning, which has the following five characteristics:

1. Spray system: The use of special shower heads and pipes can fully disinfect and clean the inside of the equipment and the surface of the positive pressure suit. The nozzle is located on the top and side of the device, covering the entire shower without dead spots.
2. Chemical dosing system: contains two reservoirs, respectively stock solution and liquid preparation, which are each other's backup. It can select the appropriate disinfectant and concentration according to different pollution levels and occasions.
3. Supply and exhaust system: set on the top of the equipment, the exhaust air is equipped with a filter device, which can be disinfected in situ. It can control the number of air changes and differential pressure inside the shower unit, ensuring the indoor environment and human comfort.
4. Life protection system: personnel must wear positive pressure protective clothing during the shower, in order to ensure normal breathing under the protective clothing, the equipment is equipped with positive pressure clothing air supply hoses on both sides, and equipped with quick self-closing joints, which is convenient for personnel to connect and pull out. The device is also equipped with an emergency escape function to protect the safety of users and the device itself in the event of any emergency.
5. Automatic control system: accurate programmable control system, which can effectively ensure that the equipment completes all operations. The touch screen at the front can visually display the process parameters of the equipment and monitor accessories including pipe valves, sensors, lighting and more. It can also be linked with the central control system to realize remote control and data transmission.

The main components of a chemical shower system are:

• A stainless steel closed box, with airtightness and corrosion resistance;
• Two interlocking airtight doors, usually inflatable airtight doors, to ensure isolation effect;
• A dosing system, automatically mixing chemical agents, such as hydrogen peroxide, sodium hypochlorite, etc.;
• A spraying system, using ultra-fine atomizing nozzles to spray chemical agents widely and without dead angles on the positive pressure protective suit, through a pressurized pump group, valve group and pipeline system;
• A control system, controlling the shower time, temperature, pressure, interlock, alarm and other functions;
• A supply and exhaust system, ensuring the air exchange rate and pressure difference inside the box, both supply and exhaust air need to pass through high-efficiency filters;
• A drainage system, discharging the waste liquid after showering, and having anti-backflow measures;
• A gas supply system, providing life support gas for the positive pressure protective suit.

Product Parameters

Model	MODEL-JH-MWC
Installtion method	Flush with the wall panel
Airtight method	Double seal ring inflatable barrier
Control mode	Siemens PLC
Communication mode	RS232 RS485 TCP/IP
Compressive strength	≥2500PA
Corrosion resistance	H2O2 sterilization, formaldehyde sterilization, disinfectant
Internal environment	Negative pressure
Work environment	-30ºC+50ºC
shower method	Automatic Sprinkler, forced water supply
Switching time	Inflatable≤5s Deflation≤5s
Open mode	HMI Human Machone Interface /Physical Byttons
Locking method	Electromagnetic lock interlock
Doorframe material	304/316
Door leaf material	304/316
Sealing strip material	Silicon rubber
Inlet medium	Compresssed air
Inflation pressure	≥0.25MPa
Action mode	The electromagnetic valve
Pressure interface gauge	RC1/8
Temperature and humidity detection	0-80ºC,0-100%RH
Power Supply	220V 50Hz
Net weight	200KG
Door closer	DORMA
Window	Round tempered glass
Door handle	¢25mm U-shaped
Shower	Atomizing nozzle+Shower head
Water supply device	Boost cycle
Poit lamp	Red closed state,green passage
Disinfection device	Dosing system mixing
Living system	Yes
Escape device	Yes
Pressure monitoring	Yes
Purification function	Yes
Drainage device	Anti-backflow floor drain
Purification filter	HEPA H14
Error alarm	Low pressure<0.15MPa
BMS system	Accessible
Authority management	Level 3 permissions
Inspection report	Verifiction Report of the Third Party (National Inspection Center)
Validation Documentation	3Q documents
Customized services	Yes
After-sales service	Yes
Installation Services	Additional quotations are required for different regions and countries

Company Profile

Certificate

Packaging & Shipping